PD988

Handheld | DMR

Highlights

diagram indicating highlights of PD988

Full Duplex Call

Send and receive communications simultaneously to enable a conversation, rather than a classic one-way transmission

Rugged and Reliable

Dust and waterproof, rated IP68, sustaining performance in harsh environments

Wireless Connectivity

Supports Bluetooth 4.0 for audio connectivity and programming

Clear Communication

Thanks to the latest audio processing technology and in-built speaker, the PD988 offers you outstanding audio quality and noise cancellation

Increased Coverage

Using the handset to retransmit communications across a site via the innovative single frequency repeater mode (licenced)

Functions

Created with Sketch. Bluetooth Audio

Bluetooth 4.0 for wireless connectivity to audio devices to improve user experience.

Created with Sketch. Pseudo Trunking

Using pseudo-trunking, a Hytera patented technology, slots can be shared to improve capacity usage with transmissions either direct to handset or to repeater.

Created with Sketch. XPT

Hytera XPT (Extended Pseudo Trunking) enables you to use limited spectrum resources more efficiently, dynamically assigning channel resource without needing a dedicated control channel.

Created with Sketch. Full Duplex Calls

Have a conversation on a call rather than a classic one-way transmission (DMR Tier III mode only)

Created with Sketch. Voice Recording

Record your transmission and call data for future analysis. Requires micro SD card and separate application for playback, chargeable licence.

Created with Sketch. Single Frequency Repeater

Utilise your PD988 radio as a repeater to improve coverage across your site (chargeable licence)

Hytera Pd895 Ux 01

Created with Sketch. Man Down

Optional (PD988G only), the man down feature will let you know if the radio has been tilted past a certain angle. This may happen for instance if the radio user has fallen over or is unconscious or injured. The alarm will be triggered after a warning is issued to the user.

Created with Sketch. Lone Worker

The lone worker feature uses a timer in the radio to measure inactivity. If the timer expires, a warning is issued, and if there is no response to that, the alarm is triggered.

Created with Sketch. Emergency Mode

Raise an alarm with top priority to a base station or to other radios with the pre-programmed emergency mode, identifying the ID of the person issuing the alarm. Also receive emergency notifications.

Created with Sketch. GPS

Optional (PD988G only), enabling location based services to improve safety and control.

Accessories for PD988

Included as standard with PD988 Included as standard with PD988

Audio

Antenna

Battery

Installation

Charger & Power

Programming

Carrying

Other

Systems that work with PD988

Technical Specifications

General

Frequency Range
UHFx: 350-527MHz UHF5: 806-941MHz VHF1: 136-174Mhz
Channel Capacity
1024
Zone Capacity
64 (maximum of 256 channels per zone)
Channel Spacing
12.5kHz / 20kHz / 25kHz
Operating Voltage
7.4V (rated)
Battery
2000mAh (Li-ion Anti-fake or Smart Battery) 2500mAh (Li-ion Anti-fake or Smart Battery) 3000mAh (Li-ion Anti-fake or Smart Battery)
Battery Life (5-5-90 Duty Cycle, High TX Power)
Digital: 19.5 Hours @2000mAh 24 Hours @2500mAh 27 Hours @3000mAh Analog: 14.5 Hours @2000mAh 18 Hours @2500mAh 21 Hours @3000mAh
Frequency Stability
±0.5ppm
Antenna Impedance
50Ω
Dimensions (H×W×D) (with standard battery, without antenna)
131 x 54.5 x 36 mm (2000mAh) 131 x 54.5 x 41 mm (2500mAh) 131 x 54.5 x 41 mm (3000mAh)
Weight (with antenna & standard battery)
350g (2000mAh), 361g (2500mAh), 366g (3000mAh)
LCD Display
160 x 128 pixels, 65536 colors 1.8 inch, 6rows

Receiver

Sensitivity Analog
0.28μV (12dB SIN AD) , 0.22μV (Typical) (12dB SIN AD)
Sensitivity Digital
0.22μV/BER5%
Selectivity TIA-603 ETSI
60dB @ 12.5kHz / 70dB @ 20/25kHz (TIA-603) 60dB @ 12.5kHz / 70dB @ 20/25kHz (ETSI)
Spurious Response Rejection TIA-603 ETSI
70dB @ 12.5/20/25kHz (TIA-603) 70dB @ 12.5/20/25kHz (ETSI)
Hum and Noise
40dB @ 12.5kHz; 43dB @ 20kHz; 45dB @ 25kHz
Rated Audio Power Output
0.5W
Rated Audio Distortion
≤3%
Audio Response
+1 ~ -3dB
Conducted Spurious Emission
< -57dBm

Transmitter

RF Power Output
UHFx: 1W/4W; VHF1: 1W/5W; UHF5: 1W/3W (806-870MHz) UHF5: 1W/2.5W (896-941MHz)
FM Modulation
11K0F3E @ 12.5kHz 14K0F3E @ 20kHz 16K0F3E @ 25kHz
4FSK Digital Modulation
12.5kHz Data Only: 7K60FXD 12.5kHz Data & Voice: 7K60FXW
Modulation Limiting
±2.5kHz @ 12.5kHz ±4.0kHz @ 20kHz; ±5.0kHz @ 25kHz
FM Hum & Noise
40dB @ 12.5kHz 43dB @ 20kHz 45dB @ 25kHz
Adjacent Channel Power
60dB @ 12.5kHz; 70dB @ 20/25kHz
Audio Response
+1 ~ -3dB
Audio Distortion
≤3%
Digital Vocoder Type
AMBE+2™ SELP
Digital Protocol
ETSI-TS102 361-1,-2,-3

Environmental Specifications

Operating Temperature
-30℃ ~ +60℃
Storage Temperature
-40℃ ~ +85℃
ESD
IEC 61000-4-2(level 4) ±8kV (contact) ±15kV (air)
American Military Standard
MIL-STD-810 C/D/E/F/G
Dust & Water Protection
IP68 Standard
Humidity
Per MIL-STD-810 C/D/E/F/G Standard
Shock & Vibration
Per MIL-STD-810 C/D/E/F/G Standard

GPS (Accuracy specs are for long-term tracking) (5 satellites visible at nominal -130dBm)

TTFF (Time To First Fix) Cold Start
<1 minute
TTFF (Time To First Fix) Hot Start
<10 seconds
Horizontal Accuracy
<5m (50% probable) <10m (95% probable)